Pars Red mine Industries Company
Clinker is one of the raw materials for cement production and is a process product and depending on the type of cement, it is used in cement composition. In general, cement is prepared in two ways, wet and dry. In the wet method, the raw materials (clinker) are mixed and ground together in water, and during the dry period, the raw materials (clinker) are mixed and ground in the dry state.

To produce it, the limestone must first be blown up by dynamite and then extracted in special crushers and gradually crushed. Stone pellets are mixed with clay slurry in ball mills. In this Asian method, the crushing of the rock is done smoothly and turned into a round, and the resulting slurry is directed to special tanks.

These materials weld together to form
4to 30 mm balls, called clinker pulp.
Production and processing of stone by slab method is one of the new methods of stone processing that is done by special machines, such as saws and wire cut. In slab cutting method, the raw stone is laminated in a reciprocating motion by special blades. Slab contraction joints should intersect at the openings for columns, and should intersect at the openings for columns. The dimensions of slab stone are mainly from 80 cm wide. After cutting the stone into slabs, the stone enters other stages such as epoxy work, vein casting, sawing, polishing and teleportation.
Gypsum or calcium sulfate with formulation (Caso4 2h2o) is a mineral that has many and varied applications in various industries. The extraction steps of this mineral are very interesting and scientifically completely classified. The products obtained from this process are not the same and have different properties and applications. So that they are used in different disciplines and situations.

Building plaster is the most widely used product among gypsum materials. We have all had the experience of using or seeing examples of it. But only experts are aware of the subtle differences between its different types and functions.
From masonry and whitewashing to micronized types used in the delicate and medical industries, the degree of refining, crushing and screening of raw materials varies greatly. In these steps, separate chemical processes are used, which strongly affect the quality and price of the final product.